Icom IC-7760 HF+50MHzSSB/CW/RTTY/PSK31-63/AM/FM 200W Transceiver New We Ship Free Worldwide

200W high output & clean transmission and reception, which is effective in contests and DX hunting. A new operating style realizes smart operation.

The IC-7760 is an HF+50MHz all-mode transceiver with a transmission output of 200W that uses the RF direct sampling method. It has
a two-piece configuration of an RF deck and a controller, and the included controller cable is 3m long. If you use a commercially available LAN cable, you can install the RF deck in a more remote location.
The freedom of installation has been greatly increased. In addition to the 7-inch main display, it is equipped with a 2.4-inch sub-display and an external display terminal.

Furthermore, by enabling the use of DIGI-SEL (automatic preselector) and a preamplifier in combination, it is now possible to effectively avoid OVF (overflow) of the A/D converter while suppressing a decrease in reception sensitivity. Of course
, the DPD (Digital Pre-Distortion) technology that has been well received in the IC-7610 and IC-PW2 is also adopted.
Despite its high output, it achieves extremely clean transmission waves. It is also equipped with a spectrum scope with the highest level of performance, and can simultaneously receive two waves in different bands/modes.
The IC-7760 will take the world’s top DXers and contestants to even greater heights.

Two-piece configuration of controller and RF deck. Improved freedom of installation, realizing space-saving operation. Two-piece

configuration of controller and RF deck. The controller cable included with the RF is 3m long, and if you use a commercially available LAN cable*, you can install the RF deck in an even more remote location.
The freedom of installation has been greatly increased. By storing the RF deck in a rack or other device away from the table, you can use the tabletop more widely.
A systematic shack including a PC, display, keyboard, etc. is realized.
CAT5e or higher, length 100m or less.